battery replace advice...

[Scalor]

has anyone tried these battery ?

http://www.unicell.com.sg/mercury.htm

[Peter]

[Scalor]

it's original never changed, and almost never used !

[Peter]

In that case, I would try the Weincell because it should be very stable at 1.35V - at least as long as it is new.

I would still match the camera meter's readings with an independent, hand-held, accurate light meter, to see if there is any difference.

I would also look out for problems with the shutter. If the camera has not been used for a long time, the shutter might be too slow. In any case, the camera very likely needs a "CLA" (Cleaning, Lubrification and Adjustment).

Good luck and have fun!

[Scalor]

i 'll try to shoot a film !
but if i buy an adapter ?

someone has a service manual of a rollei 35SE black

[Peter]

[Scalor]

[Vincenzo Maielli]

I solve this problem with Kanto MR9 adapter: have the same size of the old PX625 Mercury battery and fit the 386 silver oxide battery. This adapter have a buit in micro electronic device that trasform the 1,55 voltage of the 386 battery in 1,35 voltage of the PX625 battery.
See www.smallbattery.company.uk.org for other chance to replace any mercury batteries.
Ciao.
Vincenzo