the International Rollei Club

Hi all,

I decided yesterday to take my SL2000F out of its case and shoot a few pictures. However, it looked like the aperture setting in the viewfinder was always at 32, whatever the real aperture on the lens was. I tried with 2 lenses: the usual 1.4/50 and the 2.8/135 (2+ pin lenses). The aperture pins on the lenses (small metal triangle if I am not mistaken) were moving correctly. The aperture body-"pin" could be moved (I checked that it was not stuck). More worrisome, the exposure values stayed the same whether the diaphragm button had been previously pushed (it did get darker in the viewfinder) or not. Strangely, the first picture I took seem to go well (the exposure values moved as I changed the view), but all subsequent trials failed.

What could be wrong, or have gone wrong after that first (and only) picture?.. Any way to solve that problem myself before I send the camera for service ?

Thanks in advance!

A.

Did it ever work and do your lenses have the recess to transmitt their maximum aperture?

If yes: Does the pin on the camera move freely?

Hi Jan,

Thanks for your answer.

yes it did work. I took beautiful pictures of a National Park a few years ago.

Would you have a picture showing that recess on the lens? I suppose it must have it, given that I had no issues previously, but I'd prefer to be sure.

Same question: would you have a picture showing that camera pin? I think I know what it is, but again I'd prefer to be certain.

Cordially,

A.P.

here: http://www.taunusreiter.de/Cameras/Rollei_QBM_dt.html (scroll down a bit) everything is shown.